WinDaq Add-on Update Log

WinDaq Add-on Update Logs

July 1, 2024	Use WinDaq channel notation in Magic Meter, Programmable Digital Output and Alarms, and Gauge when constructing math equations Improved GUI for FFT and Spectrogram
Jan 1, 2024	Combined all individual Excel Links to Advanced Trigger Excel Link
Sept 7, 2017 version 2.70	Support WinDaq/ChannelStretch™ mode
version 2.64	Worked with Dataq to resolve issue with WinDaq for 1120/2100 series. Due to a bug in WinDaq, some add on can't start properly and the configuration would not be retained either. Digital output for these series are limited to D4 and higher, leaving the lower Digital ports for Event, Remote, Rate and Counter for WinDaq
Aug 18, 2016 (version 2.63)	Accept user format in Magic Meter
Sept 24, 2015 (version 2.61)	Fixed a bug in Calculated Channel Recorder from the same cause above
April 9, 2015 (version 2.60)	Fixed a bug that affected Calculated Channel Recorder. This is due to a minor modification from WinDaq's end. The error message is something like a WinDaq channel can't be found or object disconnected
March 4, 2015 (version 2.56)	Fixed a bug that prevents Alarm and Digital Output starting properly under certain configuration. This is due to a minor modification from WinDaq's end. The error message is something like a WinDaq channel can't be found
Jan 20, 2015 (version 2.55)	New features for Lab Note Taker to program digital and DAC outputs via script file
July 20, 2014 (version 2.52)	Fixed a minor bug in Lab Note Taker with support for 3rd party instrument control, which may send out mark-up commands to the device
July 15, 2014 (version 2.51)	Added <SKIP> markup commands to addon Lab Note Taker with support for 3rd party instrument control
July 10, 2014 (version 2.50)	Lab Note Taker with support for 3rd party instrument control is added
May 11, 2014 (version 2.46)	Give users the option to select or unselect SSL for email alarms
April 11, 2014 (version 2.45)	Gmail's email server adds Secure Sockets Layer (SSL), so we have to adapt to it
April 3, 2014 (version 2.44)	Added #freq operator to MagicMeter and Gauge to set up a frequency counter
July 15, 2013 (version 2.43)	Fixed the following bugs EU tag and scaling do not match the ones in WinDaq in Advanced Trigger Storage and Advanced Trigger addons
Jan 29, 2013 (version 2.41)	Serial Output is added Fixed a bug in Digital and Alarm Output : it failed to retain the size of data window Fixed a bug in Calculated Analog Output: it spawns magic meters when no channel is selected
Sept 10, 2012 (version 2.29)	Fixed a bug in Magic Meter: If advanced math function and regular channel are BOTH used in the math expression, even they are used in two separate expressions, there is a delay, which equals DataWindowLength/ChannelSampleRate
Aug 30, 2012 (version 2.28)	Fixed bugs in Digital and Alarm Output If email alarm is TRUE, it generates audio noise If advanced math function and regular channel are BOTH used in the trigger expression, even they are used in two separate trigger expressions, there is a delay, which equals DataWindowLength/ChannelSampleRate
Aug 16, 2012 (version 2.25)	Since the first rev of the involved add-ons has been obsolete for a long time, there should not be any confusion to the following modification. FFT II will be renamed to FFT. Spectrogram II will be renamed to Spectrogram Calculated Channel Recorder II will be renamed to Calculated Channel Recorder Lock button added to Lab Assistant to prevent the chart from resizing during test
June 15, 2012 (version 2.23)	Email/Text Messaging (SMS)-enabled data acquisition, or Email link for WinDaq add-ons Integration function added to Calculated Channel Recorder II Digital Output II is renamed to Digital and Alarm Output Email/SMS-option added to Digital and Alarm Output and Remote Event Note Taker Fixed the error: Digital and Alarm Output failed to retain its slider settings Fixed the error: Bad path for the email server broken in 2.15 Smoother re-installation under Windows 7 professional Lab Assistant is added Fixed the error: RateChannel renders wrong value in all WinDaq add-ons, from direct reference to ones used in calculated functions In Advanced Analog Trigger, change the trigger mark from "\|<<<" to a vertical line for easy identification
March 2, 2012 (version 2.03)	Allows FFT II and Spectrogram II to remove DC component before performing FFT
Feb 28, 2012 (version 2.02)	Calculated Analog Trigger with Excel Link is released WinDaq Add-on Batch Operation is released. Paced Note Taker with Excel Link allows timers to go higher than 60 seconds, up to 32000 seconds
Feb 14, 2012 (version 1.99)	GUI improvement for Calculated Waveform, PacedNoteTaker Better error handling for Calculated Channel Recorder II
Jan 24, 2012 (version 1.95)	GUI improvement for FFT II, Spectrogram II, DigitalOutput II, Gauge, Calculated Analog Output and MagicMeter
Dec 12, 2011 (version 1.86)	Advanced Triggered Storage is added Added to Event Counter are: Math module, Analog trigger and WinDaq link Added to Remote Note Taker are Analog trigger
Nov 21, 2011 (version 1.73)	Global Key option is added to WinDaq Manual Note Taker
Nov 1, 2011 (version 1.72)	Remove obsolete add-ons to make room for new add-ons GUI improvement for Calculated Channel AuxInputIndicator is added Digital Plot is added Keyboard operation is added to Digital Output II D7 error is fixed on Digital Output II Global Key option is added to Digital Output II
Oct 4, 2011 (version 1.67)	Fixed the polling interval of Alarm II, which was accidentally set to 1Hz in previous release Digital Output II is added.
Sept 20, 2011 (version 1.65)	Support DI-149's extra features New cross hair features (via right mouse button) for FFT II and Spectrogram II Spectrogram uses actual (averaged) update interval to calculate elapsed time for cross-hair Alarm II supports Force Reset and Force Set options Alarm II can access digital input via #dig
June 7, 2011 (version 1.58)	Min/Max retainers is added to Gauge Fixed math error in adds involving calculated channels. The glitch happens when result is very near zero
May 24, 2011 (version 1.56)	Better post-error handling for math equation option under MagicMeter and Gauge Alarm II is available for DI-148/158
May 18, 2011	Added Logarithmic Frequency Scaling to FFT II Added advanced calculated channel to Alarm II Remove the maximize button for Alarm II to prevent resizing error
April 15, 2011	Added instrument configuration for Dynamometer recorder
April 1, 2011	Users without administrator right can retain Windaq Add-on settings
March 28, 2011	Allow sign selection for torque shaft rotation in dyno recorder. Supports Torque Display 6400 and 3410
March 24, 2011	Dynamometer is added
Feb 16, 2011	Remove some restrictions for unregistered users, such as copy-and-paste function
Jan 7, 2011	Fixed following bugs: 1) Gauge does not display correct unit 2) Gauge may be placed outside of the screen if it was terminated from minimized state previously
Dec 8, 2010	MagicMeter, Gauge, Calculated DAC output and Alarm II support non-English (United States) Regional and Language options. Since other calculated add-ons require more computing powers, instead of allowing non-English (United States) Regional and Language options, it will warn users and ask for modification if period is not the decimal mark.
Nov 20, 2010	WinDaq add-on will not quit when WinDaq changes its configuration.
Nov 10, 2010	Instrumentation Gauge and Magic Meter's last location will be retained
Nov 2, 2010	Instrumentation Gauge is added Both Magic Meter and Gauge now support math involving data-window results, for example, #rms0*0.3
Oct 13, 2010:	Magic Meter is added
Oct 7, 2010	Add Trigger Status to Calculated Trigger Recorder Fixed the error message "Run Time Error 13, Type mismatch" when WinDaq throughput rate is higher than 10000 s/s while the PC's license is lower that Full Corporate License.
Oct 1, 2010	Calculated Trigger Recorder is added
Sept 7, 2010	FFT Viewer for WWB is added
Sept 1, 2010	Increase the number of calculated channel to 16 for Calculated Channel Recorder
Aug 12, 2010	Calculated Channel Recorder is added
July 12, 2010	Event Counter is added

Last update: 07/22/24