DigitalPlot

1. DigitalPlot supports digital rising/falling edge trigger mode that works like a logic analyzer. 
2. DigitalPlot provides more commonly-seen digital waveforms.
   • WinDaq
     
     
     
   • DigitalPlot
     
     

 

Features

• Bit assignment
  • Bit 0...7: Aux 0...7 if available
  • Bit 8..15: Digital Input 0..7
    

• A digital channel must be enabled in WinDaq to use this add-on.
  
  

• Uncheck the bits in BitMask to exclude them  from the plotting. For example, if DI-149 is used, only 4 digital inputs from Bit 8 to 11 are available.

• Four charting modes

  1. Scroll 

  2. Sweep

  3. Trigger +: Trigger on rising edge, both the trigger channel and trigger length can be modified.

  4. Trigger -: Trigger on falling edge, both the trigger channel and trigger length can be modified

• To modify the trigger channel and trigger length

  • Click on the chart to select trigger position

  • Click on the channel annotation to select trigger channel

• Check "HiRes" if you are running HiRes (16-bit) WinDaq. If this setting is not setup accordingly, Bit0 and Bit1 may not reflect the real state of the Aux Input 0 and 1.

• Once the waveform is stopped, one can activate a cursor to examine the data

Configuration file

C:\Windows\digitalplot.ini

Last update: 07/22/24

© www.UltimaSerial.com